Anglia Range (Export)
1st February 1963Wiring
Loom Connections
"Anglia Super"
Service Letter No 13
(Export) 1961 Series, describes how standard
wiring loom pliers could be reworked to enable
them to "press fully home" the type of
snap terminal which has separate connector
sleeves.
An additional type of snap
connector is now used on certain models in
production and this has moulded insulation on the
snap terminals and connector sleeves. Although
this method of construction reduces the
possibility of short circuits should the
terminals not be pressed fully home, wiring loom
pliers should still be used to ensure correct
assembly.
Existing loom pliers, as
illustrated in Service Letter No 13 (Export) 1961
Series, may be further modified for the latest
connectors by welding or brazing a suitable spade
end onto the plier handles, as illustrated in Fig
1
Pliers incorporating the
modified ends for both snap type terminals and
moulded type terminals can be obtained through
normal factors for this type of equipment.
Fig 1.
Modified Loom Pliers for Moulded Type Terminals
|
